How to Dual Boot macOS Mojave 10.14 with Windows 10
How To macOS Windows

How to Dual Boot macOS Mojave 10.14 with Windows 10

How to Dual Boot macOS Mojave 10.14 with Windows 10

In this article, I will show you How to Dual Boot macOS Mojave 10.14 with Windows 10 on Single SSD/HDD. As you know that every year Apple company developing and releasing a macOS operating system for Mac’s computer. And macOS Mojave is still one of the most preferred and tough operating systems for Mac computers. Although macOS Catalina 10.15 is now a major release and new operating system, again people are using macOS Mojave for there works. Due to that macOS Mojave installation of the different platform is easily more than installing macOS Catalina 10.15. While you are getting information to install two operating systems on a single SSD/HDD. It can be very tough and good work for getting new experience. However, the installation of macOS Mojave on some laptops can be easy, and on some laptops, it can be harder.

Because Apple laptops are nowadays having a highly expensive range, it can be better to take a Hackintosh. Most of the laptops which are having Nvidia graphics card don’t support macOS easily. If you are a laptop is dedicated to this sort of hardware, it means that your laptop is useless. If you have a little search on the internet about the solution of graphic card, while dual booting you will require more speed. Through the internet, you will find more solution about this issue, and a hundred percent you will find a way to get fix the error.

So, in this article, you will learn the Dual-Booting in “6” steps. First of all, you are needed of 3 USB drive for Dual-Booting, the USB Drive should be at least 16 GB’s. One USB Drive for macOS Mojave, for Windows 10, and Post-installation. And here you will learn also how to create macOS Mojave USB installer Drive.

Create macOS Mojave Bootable USB Drive using Disk Utility

There are ways for creating macOS Mojave Bootable USB installer, as on above I have mentioned of the given link. Also, you can check there or for creating macOS Mojave USB installer, you can use TrasnMac, Disk Utility, and Terminal. The best experience that I have done that is Disk Utility, it can be easier than others.

However, let’s get started with creating a macOS Mojave USB installer. Before creating USB installer first download all the required files of macOS Mojave, Windows 10, and Drivers.

Step 1. Open your Mac computer, then go ahead on the top click Go, and down click on “Utilities”.

Open Disk Utility
Open Disk Utility

Step 2. While the Disk Utility folder is opened again click on “Disk Utility”.

Launch Disk Utility
Launch Disk Utility

Step 3. While the “Disk Utility” is launched, select the USB Drive. And click “Erase” button gives a “Name”, select the “Format” “Mac OS Extended (Journaled), and the “Scheme” “GUID Partition MAP”, then click on “Erase” button for partition.

Create partition
Create partition

Step 4. When the partition is successfully is done, close the “Disk Utility”. And on the right-handed click on the “Search Spotlight” and type “Terminal”, then click enter.

Open Terminal
Open Terminal

Step 5. After that, Terminal is launched copy and paste the below code and press enter. Then type your password and click enter.

sudo /Applications/install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia -- Volume \Volumes/USB
Copy and paste the code
Copy and paste the code

Step 6. Here you will ask “If you wish to continue (Y) then press return: Y. Type “Y” and press enter key.

Press Y
Type Y

Clover Configuration

In clover configurator, you need to copy the macOS Mojave 10.14 dmg file. After that, Bootable USB is created open clover configurator. Above I have provided the download link of Clover Configurator from there you can download. Remember that Clover Configurator is only can be used in Mac’s computers.

Step 1. On the right-handed click on “Search Spotlight” then type “Clover Configurator” and press enter.

Step 2. After that, Clover configurator launched. Select the USB Drive from the left-handed sidebar, then click on “Mount Partition”.

Mount EFI
Mount EFI

Step 3. After that, the partition is created another separate folder will create on the desktop. Open the folder and delete the“EFI file”.

Move to Trash
Move to Trash

Step 4. Again open the EFI folder then paste the “EFi file” into EFI folder.

Paste macOS Mojave 10.14 dmg file
Paste macOS Mojave 10.14 dmg file

Step 5. Now your USB drive is ready and created an installer USB. Right-click and select Eject then “Eject All” the related Drive to macOS Mojave 10.14.

Eject the USB Drive
Eject the USB Drive

Post-installation

This portion of macOS Mojave is really important. After the installation of every macOS operating system, it is important to install all the drivers. Create the USB post-installation with “Disk Utility”, insert the USB drive for post-installation and follow the below instruction.

Step 1. Click on the top menu bar on Go, and choose “Utilities”.

Disk Utility
Disk Utility

Step 2. Now click on “Disk Utility”

Disk Utility
Disk Utility

Step 3. Select the USB Drive and click on “Erase” give a “Name”, “Format” “Mac OS Extended (Journaled”, the “Scheme” “GUID Partition Map”. And finally, click on the “Erase” button.

Create partition
Create partition

Step 4. Now click the “Done” button

Done
Done

Step 5. After that, the USB drive is created for post-installation. Now open the Post-install drive and copy-paste the necessary file.

Copy the post installation file
Copy the post-installation file

BIOS Configuration for Dual-Booting of macOS Mojave 10.14 and Windows 10

Before going to install macOS Mojave 10.14 on computer. For dual-booting you have some BIOS configuration to do that. Without BIOS Configuration it is impossible to install or dual boot Windows 10 with macOS Mojave 10.14 on single SSD/HDD. Follow the picture guide and don’t miss any portion otherwise you will face error during the installation of Windows 10.

At the first step of BIOS, setting configuration. Restart your PC then press “Delete” key to enter the BIOS window. Then on the “Save & Exit” tab select “Load Optimized Defaults” and select “Yes” then press enter.

Load optimized defaults
Load optimized defaults

Now go up to choose “Save & Exit Setup” and press “Yes”

Save & Exit
Save & Exit

After pressing “Save & Exit Setup” your PC will restart. Again press “Delete” button for BIOS setting, on “BIOS” tab select “Fast Boot” and “Disabled” that.

Fast Boot
Fast Boot

Come down select “Mouse Speed” and choose “2X”

Mouse speed
Mouse speed

Enter “Windows 8/10 Features” and select the “Other OS”

Windows 8/10 Features
Windows 8/10 Features

On “Storage Boot Option Control” select “Legacy”

Storage Boot Option Control
Storage Boot Option Control

For “Other PCI devices” select “UEFI”

Other PCI devices
Other PCI devices

Go to “Peripherals” and on “Initial Display Output” select the “PCIe 1 Slot”

Initial Display Output
Initial Display Output

Now select “Intel platform Trust Technology (PTT)” and select “Disabled”Intel platform

Intel platform select down the “USB Configuration” and press enter to boot into next window

USB Configuration
USB Configuration

Select “XHCI Hand-off” and “Enabled” that

XHCI Hand-OFF
XHCI Hand-OFF

Using keyboard select “SATA and RST configuration” and press enter key

SATA and RST configuration
SATA and RST configuration

Now click on “SATA Mode Selection” and choose “AHCI”

SATA Mode Selection
SATA Mode Selection

Select “Chipset” from tab and on Chipset select Chipset

Chipset
Chipset

Now you are completely done with BIOS Configuration. And the final step, go ahead on “Save & Exit” and press “Yes”

Save & Exit
Save & Exit

Dual Boot macOS Mojave with Windows 10

Now everything is ready to install macOS Mojave 10.14 on your PC. Therefore, there is something you might think that first, we should install macOS Mojave or Windows 10. There will be many circumstances you should install first macOS Mojave. Because our computer is compatible with macOS Mojave not with Windows 10. It can happen that if you should install Windows 10 first during installation you should face any error. Then it can be better to install macOS Mojave 10.14 before Windows 10 installation.

Insert the USB Drive of macOS Mojave 10.14 and restart your computer. After your computer is restarted press boot menu button. Then a boot from “UEFI: hp v232w PMAP, Partition 1”

Boot menu
Boot menu

On Clover, boot manager select “Option” and click enter

Clover
Clover

After pressing enter on option this below page will open. On the first tab “Boot Args: type “-v nv_disable=1_” and press enter.

Boot Args
Boot Args

Select the Boot macOS Install from macOS Mojave and press enter.

Boot macOS Mojave
Boot macOS Mojave

Bypass this black screen

Choose your “Language” and press continue

Language
Language

In macOS, Utilities choose “Disk Utility” and press continue

Disk Utility
Disk Utility

Click on “View” and choose “Show All Devices”

Show all Devices
Show all Devices

After clicking on show all devices, here you will see the list of drives. Select the drive where you want to install macOS Mojave 10.14. And click on “Erase” and give a “Name”, “Format” “APFS”, and “Scheme” “GUID Partition Map” then click “Erase”.

Create Partition
Create Partition

After that, the partition is created click “Done”

Done
Done

Install macOS Mojave 10.14 on Macintosh HD

After pressing done you will be back to macOS Utility window now select “Install macOS” and press continue.

Install macOS
Install macOS

To set up the installation of macOS Mojave, click continue.

Install macOS Mojave
Install macOS Mojave

Read about the terms and condition and press Agree.

Agree to terms & condition
Agree to terms & condition

Now choose the drive which you have created the partition for macOS Mojave, and click Install.

macOS Mojave
macOS Mojave

macOS Mojave will be installed, wait for some minutes after the installation is completed your computer will restart automatically.

Installing macOS Mojave
Installing macOS Mojave

While the computer is restarted press boot menu. And choose boot from “UEFI: hp v232w PMAP, Partition 1” and press enter.

Boot menu
Boot menu

Using keyboard select boot option and press enter.

Boot option
Boot option

In this step again type the recommended code “-v nv_disable=1_” and press enter.

Again by pressing enter you will be in the Boot menu and now boot macOS Mojave again from Macintosh HD.

Boot macOS Mojave
Boot macOS Mojave

Bypass this black screen in some seconds

Installing macOS Mojave 10.14 in 14 minutes

Installing macOS Mojave
Installing macOS Mojave

Now the installation of macOS Mojave is done click Restart button.

Restart the installation
Restart the installation

This is the last step that you will press the boot menu key. And boot macOS Mojave from “UEFI: hp v232w PMAP, Partition 1” then press enter.

Boot menu
Boot menu

Now choose “Options” and press enter

Boot option
Boot option

Select Boot Args and type -v and press 2 times enter key.

Boot Args
Boot Args

Here it will be the last step of installation of macOS Mojave from Macintosh HD

Boot macOS Mojave
Boot macOS Mojave

Choose your “Language” and press Continue

Language
Language

macOS Mojave Last Step of installation on Macintosh HD

  • Select your country and click continue.
  • select your keyboard and click continue.
  • Agree to Data & Privacy and click continue.
  • Choose Don’t transfer any information right now and click continue.
  • Enter your Apple ID, and click continue.
  • Again Agree to terms and condition and click continue.
  • Create your computer account and click continue.
  • Click agree to express setup and click continue.
  • Choose your look and click continue.
  • Wait for the desktop to be ready for the first use.

Post-Installation of macOS Mojave 10.14

As above I mentioned for you that macOS Mojave post-installation is important. Somehow, fixing the sound, Graphic, Wi-fi, and other Drivers issue by post-installation.

Insert the USB drive of Post-installation and launch Clover configurator

Open Clover configurator
Open Clover configurator

From clover configurator, you are going to Mount the EFI. By pressing on “Mount Partition” on the selected drive and by entering the Username, and password.

Mount EFI
Mount EFI

Again EFI installs macOS of EFI on install macOS Mojave also.

EFI install macOS
EFI install macOS

Now select the EFI partition folder of your system and open it. Right-click and select Move to trash.

EFI partition
EFI partition

Open the EFI Partition of your USB drive and copy the EFI file.

USB EFI partition
USB EFI partition

Paste that into EFI drive partition folder

Paste
Paste

Now eject the post-install folder

Eject
Eject

Here open the Fixes folder and copy the “Ethernet Fix” and “Audio Fixes” and paste that into the desktop.

Open fixes folder
Open fixes folder

Now launch Ethernet fixes drivers.

Launch Ethernet
Launch Ethernet

Install intel Ethernet for completing the process of this installation click Install.

Install Ethernet
Install Ethernet

Open Kext Utility

Open Kexts Utility
Open Kexts Utility

After that, you launched Kexts Utility copy the VoodooHDA.Kext in Kext Utility window.

Installing Kext Utility
Installing Kext Utility

This below is the other Kexts when the Clover Configurator doesn’t work in that case install the below codes.

  • For the sound issue, you have to install Voodoohda.
  • AppleIntelE1000e.kext
  • AtherosE2200Ethernet.kext
  • FakeSMC.kext
  • IntelGraphicsFixup.kext
  • IntelMausiEthernet.kext
  • Lilu.kext
  • NullCPUPowerManagement.kext
  • NvidiagraphicsFixup.kext
  • RealtekRTL8111.kext
  • Shiki.kext
  • USBInjectAll.kext
  • VoodooPS2Controller.kext

Shrink Volume for Windows 10 installation

After that, you have done all configuration and installation of macOS Mojave. It is the time to shrink volume for Windows 10 installation. For Windows 10 installation you need at least 12 GB storage bellow you will learn how to shrink volume for Windows 10. The requirement of Windows 10 installation is just 12 GB but it depends on you how much you will shrink for Windows 10.

  • Click on the search Spotlight, and search for Disk Utility.
  • After that, select the hard drive and click on the partition again click on Partition.
  • Manage the space, and give Name, Mac OS Extended (Journaled) and click Apply.
  • After clicking Apply click partition.
  • Click Continue
  • And close the Disk Utility.
  • Or you can also create a partition while installing Windows 10.
Windows 10 Volume
Windows 10 Volume

Dual Boot macOS Mojave 10.14 with Windows 10

The installation of Windows 10 is totally simple. Before installing you need to create a bootable USB drive for it. There are 2 different ways for creating Bootable USB for Windows 10, using CMD and RUFUS. I have good result using CMD for creating Bootable USB for Windows 10/8/80.1/7 and recommend you to use CMD.

Insert Windows 10 USB installer drive then press boot menu. And select “UEFI: SONY Storage Media PMAP, Partition 1” and press enter key.

Boot Windows 10
Boot Windows 10
  • At the first welcome window select your language click next.
  • Click install
  • Enter the Windows 10 serial key if you have, if not simply click Skip.
  • Agree to terms and condition click next.
  • Custom: Install Windows only (Advanced).
  • Format the drive and make ready for installation.
  • Wait for Windows 10 to be installed properly, after that, the installation is completed complete the other preferences.
  • After the installation is done for the first use install the drivers.

Read Also:

Conclusion

That’s all about How to Dual Boot macOS Mojave 10.14 with Windows 10. I hope you have gotten something from this article related to the dual boot of macOS Mojave 10.14 with Windows 10. If you like this share your suggestion and feedback and subscribe your Blog for further posts.

Related posts

How To Use macOS Catalina full screen on VirtualBox on Windows

AnVari

How to install Kali Linux on VirtualBox on Windows – 2019

AnVari

Download macOS Mojave Image file for VMware & VirtualBox

AnVari

6 comments

How to Dual Boot macOS Catalina 10.15 with Windows 10 August 17, 2019 at 4:22 am

[…] How to Dual Boot macOS Mojave 10.14 with Windows 10 […]

Reply
How to Install macOS Mojave 10.14 on PC-Hackintosh August 19, 2019 at 11:26 am

[…] How to Dual Boot macOS Mojave 10.14 with Windows 10 […]

Reply
How to install MacOS Mojave on VMware on windows August 19, 2019 at 11:29 am

[…] How to Dual Boot macOS Mojave 10.14 with Windows 10 […]

Reply
How to install MacOS Mojave on VirtualBox and - Windows August 19, 2019 at 11:30 am

[…] How to Dual Boot macOS Mojave 10.14 with Windows 10 […]

Reply
Install macOS Mojave on VMware on Windows PC [New Method] January 9, 2020 at 10:08 am

[…] Now there are lots of techniques to install macOS on your PC-Hackintosh, or Windows PC, and Dual Boot Boot macOS with Windows 10 is a single drive. Or you can install some of the supported computers. But not all the hardware can support the macOS […]

Reply
How to Install macOS Catalina on VMware on AMD Systems January 30, 2020 at 4:14 pm

[…] How to Dual Boot macOS Mojave 10.14 with Windows 10 […]

Reply

Leave a Comment